Fuel Pills
50 Count Bottle 4-Pill Pack Counter Display for Fuel Pills
CleanBoost™ Fuel Pills are designed using the same technology as our CleanBoost liquid products. With extensive testing in place to assure proper performance, CleanBoost Fuel Pills will dramatically reduces the carbon particulate emissions while giving the fuel a chance to burn more complete in the combustion chamber. There is the obvious saving associated with increasing the energy output of the fuel.
EPA Registered and able to be used in Diesel and Gasoline applications.
CleanBoost Fuel Pills:
Removes Deposits:
The components in Clean Boost Fuel Pills cause deposit removal by interacting with the surface of the engine components where deposits are left behind. This process allows the release of carbon atoms in the form of CO2 that occur at the lower temperatures found at the deposit surface.
Decreases Fuel Consumption:
Fuel economy shows up as the carbon deposits are removed from the internal engine components. This process is due to the more efficient conversion of the fuels CO2 and the fact that deposits that absorbs and protects the fuel from being completely burned in the combustion chamber.
Reduces Emissions:
The primary source for harmful emissions is the carbon deposits themselves. With the deposits being reduced and or removed, there is a drastic reduction in the emissions of CO, NOx, SOx, HC and particulates which help the environment and healthier running equipment.
Lower Exhaust Temperatures:
Diesel and Gasoline alike has a limited amount of energy that is derived through the production of CO2. The components in Clean Boost Fuel Pills promote the production of CO2. When more of a fuel's energy is released during the combustion phase less is available to be released during the exhaust phase. The difference in energy release correlates to a temperature from in exhaust temperatures. A lower temperature during the exhaust phase, due to decreased CO2 production during that phase, results in cooler exhaust.
Extends Engine Oil Life:
Clean Boost™ treated fuels tend to produce smaller and less abrasive particles during the combustion process which in connection with the removal of carbon deposits, results in cleaner, longer lasting oil. These results lead to reduced engine wear and less maintenance time.
Extended Equipment Life:
Equipment life is increased due to lack of deposit buildup, cleaner oil and reduced friction. Injectors, valves, rings and other associated parts show little sign of wear even after extended use.
Octane-Requirement Decrease:
In gasoline applications a lower octane fuel can be used, due to carbon deposit removal, and still provide the same performance as with previous higher-octane fuels. Dyno testing shows an increase in horse-power and an increase in octane.
Application Suggestion-Recommendation:
Many vehicles are equipted with an ECM (Electronic Controlled Module). When using our fuel products your equipment may see different results due to reduced temperatures in the combustion chamber. The ECM is programmed to look for the EGT's (Exhaust Gas Temperature) readings which are usually in the 1100°F to 1350°F range. When using Clean Boost fuel products with on the EGTdiesel fuel will see a lower temperature range of EGT's possibly up to 300 degrees F. With this lower temperature range the ECM will allow more fuel to be burned trying to raise the operating EGT's to the higher temperature, thus using up any savings that the Clean Boost produced. We recommend resetting the ECM of the vehicle by disconnecting the negative battery cable for at least 1 hour, this will aloow the ECM to reprogram and work more efficently when adding Clean Boost to your vehicle.
Now available in 4-count, 50-count and bulk option. New this 2012, Counter Display with 30 each 4-pack option.
Ask or Call for a distributor in your area, CleanBoost is a registered trademark for Combustion Technologies USA
Product Information Sheet -Click Here-
